Is PeakFinder not working / having issues for you?

APP NAME
PeakFinder
VERSION
4.7.23
APP WORKING?

Recently reported problems with PeakFinder within the last 24 hours

Not Working85%
Login Issue88%
Loading Problem77%
Installation Issue70%

PeakFinder App Status (April 2024)

If you are having trouble with the PeakFinder app, it may be due to a problem with your device or internet connection. If you suspect that the app itself is causing the issue, please submit a comment describing the problem, and someone from the community may be able to assist you. In the meantime, you can try the following troubleshooting steps.

App Name PeakFinder
App Category Travel
Developer PeakFinder GmbH
Relase Date 12 March 2010, Friday
Last Update 03 December 2023, Sunday
Compatibility IOS 13.0 or later

Common PeakFinder App Problems and Troubleshooting Steps

Android, iOS, or macOS operating system users may encounter a problem where an app will display a black screen for a few seconds before crashing, with or without an error message. However, there are a few methods you can try to fix this issue:

  1. Sometimes, this problem may be caused by a temporary loading issue. To fix this, go to the recent applications menu on your phone, usually accessed by the first left button, and close the app that is experiencing the issue. Then, re-open the app.
  2. If that doesn't work, try doing a hard reboot of your iPhone, iPad, Mac or Android device by simultaneously pressing and holding the "Home" and "Power" buttons for up to 10 seconds, then release them and hold the "Power" button until the screen turns on. After that, try opening the app again.
  3. If none of the above solutions work, another option is to wait for the phone battery to drain and turn off automatically. After that, charge the phone and turn it on and try opening the app again.
  4. If the problem persists, you may need to uninstall and re-install the app. Re-installing the app will restore all settings.
  5. If the app still does not work, you can try installing older versions of the app.

My PeakFinder app wont load or not working properly (loading error / server error / connection error / screen freeze / ping problem)

There are a number of reasons why a mobile app may experience loading issues. Some common causes include:

  1. The PeakFinder app server may be experiencing downtime, which can cause loading issues. Try accessing the app again after a few minutes.
  2. Your wifi or mobile data connection may not be working properly, which can affect the app's ability to load. Make sure your connection is stable.
  3. There may be too many users accessing the app at the same time, causing a slowdown. In this case, try accessing the app again after a few minutes when usage may be lower.

I'm having PeakFinder login issue or account related issues

If you are experiencing issues with logging in or with your account, please take the following steps to troubleshoot the problem:

  1. Check if the PeakFinder server is down, as this can cause login and account issues. If so, try logging in again after a few minutes.
  2. Verify that your wifi or mobile data connection is working properly.
  3. Ensure that you are using the correct login credentials. Double check the details you are entering.
  4. If you're logging in using a third-party service like Facebook, Twitter, or Google, check to make sure that the service is functioning properly by visiting its official website.
  5. If you see error message, check if your account has been banned or deactivated.

I have PeakFinder app installation issues

There seems to be some issues with the installation of the PeakFinder app. To resolve this, please follow these steps:

  1. Ensure that your wifi or internet connection is stable.
  2. Verify that you have enough storage space on your mobile device. A lack of sufficient space may prevent the app from being installed.
  3. Check that the version of the MacOS, IOS or Android operating system on your device is compatible with the version of the app you are trying to install.
peakfinder not working image-1
peakfinder not working image-2
peakfinder not working image-3
peakfinder not working image-4

My PeakFinder app is not updating properly in my phone

In order to ensure that you are able to update the PeakFinder app, please take the following steps:

  1. Verify that your wifi or mobile data connection is functioning properly. If the connection is down, it may prevent the app from updating.
  2. Make sure that your phone has enough storage space to download the updates. If there is not enough space, it may prevent the app from updating.

Audio/video loading problem with PeakFinder

If you are experiencing audio problems while using a phone, there are a few steps you can take to troubleshoot the issue:

  1. Verify that the volume on your phone is not turned down or muted.
  2. Try using headphones to determine if the problem is with the phone's speakers or with the app itself.

If you are having trouble with videos loading, some potential solutions include:

  1. Checking your internet speed and wifi connectivity to ensure that you have a stable connection.
  2. Make sure that your phone has enough storage space to download the videos.
  3. Check if the app is compatible with your operating system version.
  4. Check that your phone is not running on low-power mode.

PeakFinder app notifications are not working properly

If you are not receiving notifications for the PeakFinder app, you can check the app's notification settings by following these steps:

  1. Go to the "Apps" section on your device. Locate the "PeakFinder" app.
  2. Check the notification settings to see if they are enabled. If they are not, please enable them.
  3. If you are not getting notification sounds, make sure that the app's notification sound is not accidentally muted.

Please wait! PeakFinder app comments loading...

I have a problem with PeakFinder!

Are you experiencing issues with the PeakFinder app or would you like to share some feedback? Please write your problem above and someone from our community may help you.

PeakFinder Developer Updates

Version 4.7.23 03 December 2023

- Fixed an error in the visiblity calculations. - Various performance improvements and bug fixes..

Version 4.7.19 07 September 2023

- New function to freeze the camera image. Just press on the compass icon to stop/start the camera stream. - Various performance improvements and bug fixes..

Version 4.7.6 23 March 2023

Smaller optimizations and bug fixes..

Version 4.6.21 20 January 2023

Smaller optimizations and bug fixes..

Version 4.6.20 10 January 2023

On some devices PeakFinder did not start correctly since iOS 16. Sorry that the bug fixing took so long. Thanks to the support of Ralf S. and Giovanni B. I could finally fix the bug. Many thanks to both of them!.

Version 4.6.12 11 November 2022

Smaller optimizations and bug fixes..

Version 4.6.5 10 September 2022

••• Bigger font ••• You can select a larger font via the Settings menu. ••• Export functions ••• Export functions of your marks and the visible mountains..

Version 4.5.5 06 July 2022

••• Dark-Mode ••• If you want to use PeakFinder at night, you can set the appearance to 'dark' (Dark-Mode) via the PeakFinder menu 'Settings'. ••• Filter by marks ••• Using the slider function (bottom left) you can filter the display of mountain names according to your marks. This way you can easily display all your favorite mountains..

Version 4.4.18 10 April 2022

••• Marks ••• Mark mountains and places you like. These can be your favorite mountains, mountains where you have already been or mountains you want to climb. You can also mark your home. So you can see if it would be visible from a mountain top. ••• Account ••• With an account you can link your marks with your other devices and the PeakFinder website. PeakFinder also works without an account. Then the markers remain stored only on your device. ••• Favorites ••• You can now find your favorites under 'My marks'..

Version 4.3.19 13 February 2022

Smaller optimizations and bug fixes..

Version 4.3.10 14 September 2021

Smaller optimizations and bug fixes..

Version 4.3.8 28 July 2021

- If you press on the name in the lower part of the screen, a dialog with information about your viewpoint will be displayed. - Improved display of the taken photos (checkout the PeakFinder menu 'Photos'). - A taken photo can be renamed..

Version 4.3.2 01 June 2021

••• Measure distance and height ••• The telescope (tap once in the centre of the screen) now shows the distance and height from any point in the terrain. ••• Minimum altitude of peak names ••• A minimum elevation for the display of the mountain names can now be selected via the sliders at the bottom left. ••• Coordinate grid ••• In the menu 'Settings' a coordinate grid can now be activated. This is helpful for photographers and for surveying the landscape..

Version 4.2.28 02 March 2021

Smaller optimizations and bug fixes..

Version 4.2.17 19 November 2020

Improved the stability of the camera image overlay..

Version 4.2.14 06 October 2020

Smaller optimizations and bug fixes..

Similar app Problems
✓ PeakFinder Help Center Note

Update your device software to the latest version, delete the app and redownload it from the app store. Your peakfinder app progress will be retained as long as the device is connected to the internet. Also, ensure that your device meets the minimum system requirements.