Is Jetting for KTM 2T Moto not working / having issues for you?

APP NAME
Jetting for KTM 2T Moto
VERSION
2.6
APP WORKING?

Recently reported problems with Jetting for KTM 2T Moto within the last 24 hours

Not Working60%
Login Issue12%
Loading Problem66%
Installation Issue47%

Jetting for KTM 2T Moto App Status (April 2024)

If you're experiencing difficulties with the Jetting for KTM 2T Moto app, the issue might be related to your device or internet connectivity. Should you believe the app is the culprit, kindly provide a detailed description of the problem, and a community member might offer guidance. While you await feedback, consider attempting these troubleshooting measures.

App Name Jetting for KTM 2T Moto
App Category Sports
Developer Ballistic Solutions LLC
Relase Date 07 March 2019, Thursday
Last Update 22 July 2022, Friday
Compatibility IOS 9.0 or later

Common Jetting for KTM 2T Moto App Problems and Troubleshooting Steps

Android, iOS, or macOS operating system users may encounter a problem where an app will display a black screen for a few seconds before crashing, with or without an error message. However, there are a few methods you can try to fix this issue:

  1. Sometimes, this problem may be caused by a temporary loading issue. To fix this, go to the recent applications menu on your phone, usually accessed by the first left button, and close the app that is experiencing the issue. Then, re-open the app.
  2. If that doesn't work, try doing a hard reboot of your iPhone, iPad, Mac or Android device by simultaneously pressing and holding the "Home" and "Power" buttons for up to 10 seconds, then release them and hold the "Power" button until the screen turns on. After that, try opening the app again.
  3. If none of the above solutions work, another option is to wait for the phone battery to drain and turn off automatically. After that, charge the phone and turn it on and try opening the app again.
  4. If the problem persists, you may need to uninstall and re-install the app. Re-installing the app will restore all settings.
  5. If the app still does not work, you can try installing older versions of the app.

My Jetting for KTM 2T Moto app wont load or not working properly (loading error / server error / connection error / screen freeze / ping problem)

There are a number of reasons why a mobile app may experience loading issues. Some common causes include:

  1. The Jetting for KTM 2T Moto app server may be experiencing downtime, which can cause loading issues. Try accessing the app again after a few minutes.
  2. Your wifi or mobile data connection may not be working properly, which can affect the app's ability to load. Make sure your connection is stable.
  3. There may be too many users accessing the app at the same time, causing a slowdown. In this case, try accessing the app again after a few minutes when usage may be lower.

I'm having Jetting for KTM 2T Moto login issue or account related issues

If you are experiencing issues with logging in or with your account, please take the following steps to troubleshoot the problem:

  1. Check if the Jetting for KTM 2T Moto server is down, as this can cause login and account issues. If so, try logging in again after a few minutes.
  2. Verify that your wifi or mobile data connection is working properly.
  3. Ensure that you are using the correct login credentials. Double check the details you are entering.
  4. If you're logging in using a third-party service like Facebook, Twitter, or Google, check to make sure that the service is functioning properly by visiting its official website.
  5. If you see error message, check if your account has been banned or deactivated.

I have Jetting for KTM 2T Moto app installation issues

There seems to be some issues with the installation of the Jetting for KTM 2T Moto app. To resolve this, please follow these steps:

  1. Ensure that your wifi or internet connection is stable.
  2. Verify that you have enough storage space on your mobile device. A lack of sufficient space may prevent the app from being installed.
  3. Check that the version of the MacOS, IOS or Android operating system on your device is compatible with the version of the app you are trying to install.
jetting for ktm 2t moto not working image-1
jetting for ktm 2t moto not working image-2
jetting for ktm 2t moto not working image-3
jetting for ktm 2t moto not working image-4

My Jetting for KTM 2T Moto app is not updating properly in my phone

In order to ensure that you are able to update the Jetting for KTM 2T Moto app, please take the following steps:

  1. Verify that your wifi or mobile data connection is functioning properly. If the connection is down, it may prevent the app from updating.
  2. Make sure that your phone has enough storage space to download the updates. If there is not enough space, it may prevent the app from updating.

Audio/video loading problem with Jetting for KTM 2T Moto

If you are experiencing audio problems while using a phone, there are a few steps you can take to troubleshoot the issue:

  1. Verify that the volume on your phone is not turned down or muted.
  2. Try using headphones to determine if the problem is with the phone's speakers or with the app itself.

If you are having trouble with videos loading, some potential solutions include:

  1. Checking your internet speed and wifi connectivity to ensure that you have a stable connection.
  2. Make sure that your phone has enough storage space to download the videos.
  3. Check if the app is compatible with your operating system version.
  4. Check that your phone is not running on low-power mode.

Jetting for KTM 2T Moto app notifications are not working properly

If you are not receiving notifications for the Jetting for KTM 2T Moto app, you can check the app's notification settings by following these steps:

  1. Go to the "Apps" section on your device. Locate the "Jetting for KTM 2T Moto" app.
  2. Check the notification settings to see if they are enabled. If they are not, please enable them.
  3. If you are not getting notification sounds, make sure that the app's notification sound is not accidentally muted.

Please wait! Jetting for KTM 2T Moto app comments loading...

I have a problem with Jetting for KTM 2T Moto!

Are you experiencing issues with the Jetting for KTM 2T Moto app or would you like to share some feedback? Please write your problem above and someone from our community may help you.

Jetting for KTM 2T Moto Developer Updates

Version 2.6 22 July 2022
• Now you can choose models from 1998 to 2023 year
• Also new models have been added. Such as 50 SX, 50 SX Mini, 50 SX Pro Senior, 50 SX Pro Junior, 50 Senior, 50 Supermoto, 60 SX, 125 MXC, 125 EXE, 125 Supermoto, 150 XC-W, 200 SX, 200 MXC, 200 EGS, 200 XC-W, 250 MXC, 250 XC-W, 300 XC-W, 380 SX, 380 EXC, 380 MXC
• Added new feature: get weather (temperature, pressure, humidity) via Bluetooth using weather stations: Kestrel DROP, Kestrel 5x00, WeatherFlow WEATHERmeter, Skywatch BL
• Added new feature: added the ability to calibrate the barometer built into your phone or tablet (go to the “Settings“ tab, then “Measurement units“)
• Added new feature: added various utilities (unit converters) (go to the “Settings“ tab, then “Utils“)
• We have improved our weather calculator significantly. Now you can manually select which type of atmospheric pressure you are working with (for example if you use portable barometers, weather stations):
- sea level pressure QNH
- sea level pressure QFF
- station pressure (barometric pressure)
• Many carburation recommendations have been slightly revised for better performance. Therefore, we strongly recommend that you check the fine tuning sliders, you may need to change them
• Now you can see size of Throttle Valve for each carburation recommendation on the 'Results' tab
• New type of fuels have been added: VP Racing C12, VP Racing 110, VP Racing MRX02
• On the results tab, click on the drop-down menu 'Weather (AirLab)', new data for tuners are available: Air Density, Relative Air Density, Density Altitude, Station Pressure, SAE - Dyno Correction Factor, SAE - Relative Horsepower, Volumetric Content Of Oxygen, Oxygen Pressure
• The new color design is available (night mode), you can find it on 'Engine' tab at the very bottom
• Improved functionality for the feature 'Weather for custom location'. We added a search bar where you can enter the location name. Search places easier and faster now
• We added new fuels, this is gasoline with ethanol. It require a richer carburation than regular premium gasoline
• Improved functionality and accuracy of fuel calculator
• Bug fixes for 'share setup with friends' feature
• Fixes for showing 'Carburetor icing alert', now it doesn't overlap other content
• We reworked the altitude determination algorithm for the 'weather for custom location' feature. We hope that now, if you manually selected your location, the altitude will be calculated with much greater accuracy
• We added the ability to leave text notes for each history in 'History' tab. To do this, open any History, enter edit mode and add a note.
Version 2.5 16 February 2022
• Now you can choose models from 1998 to 2022 year
• Also new models have been added. Such as 50 SX, 50 SX Mini, 50 SX Pro Senior, 50 SX Pro Junior, 50 Senior, 50 Supermoto, 60 SX, 125 MXC, 125 EXE, 125 Supermoto, 150 XC-W, 200 SX, 200 MXC, 200 EGS, 200 XC-W, 250 MXC, 250 XC-W, 300 XC-W, 380 SX, 380 EXC, 380 MXC
• Added new feature: get weather (temperature, pressure, humidity) via Bluetooth using weather stations: Kestrel DROP, Kestrel 5x00, WeatherFlow WEATHERmeter, Skywatch BL
• Added new feature: added the ability to calibrate the barometer built into your phone or tablet (go to the “Settings“ tab, then “Measurement units“)
• Added new feature: added various utilities (unit converters) (go to the “Settings“ tab, then “Utils“)
• We have improved our weather calculator significantly. Now you can manually select which type of atmospheric pressure you are working with (for example if you use portable barometers, weather stations):
- sea level pressure QNH
- sea level pressure QFF
- station pressure (barometric pressure)
• Many carburation recommendations have been slightly revised for better performance. Therefore, we strongly recommend that you check the fine tuning sliders, you may need to change them
• Now you can see size of Throttle Valve for each carburation recommendation on the 'Results' tab
• New type of fuels have been added: VP Racing C12, VP Racing 110, VP Racing MRX02
• On the results tab, click on the drop-down menu 'Weather (AirLab)', new data for tuners are available: Air Density, Relative Air Density, Density Altitude, Station Pressure, SAE - Dyno Correction Factor, SAE - Relative Horsepower, Volumetric Content Of Oxygen, Oxygen Pressure
• The new color design is available (night mode), you can find it on 'Engine' tab at the very bottom
• Improved functionality for the feature 'Weather for custom location'. We added a search bar where you can enter the location name. Search places easier and faster now
• We added new fuels, this is gasoline with ethanol. It require a richer carburation than regular premium gasoline
• Improved functionality and accuracy of fuel calculator
• Bug fixes for 'share setup with friends' feature
• Fixes for showing 'Carburetor icing alert', now it doesn't overlap other content
• We reworked the altitude determination algorithm for the 'weather for custom location' feature. We hope that now, if you manually selected your location, the altitude will be calculated with much greater accuracy
• We added the ability to leave text notes for each history in 'History' tab. To do this, open any History, enter edit mode and add a note.
Version 2.4 11 November 2021
• Now you can choose models from 1998 to 2022 year
• Also new models have been added. Such as 50 SX, 50 SX Mini, 50 SX Pro Senior, 50 SX Pro Junior, 50 Senior, 50 Supermoto, 60 SX, 125 MXC, 125 EXE, 125 Supermoto, 150 XC-W, 200 SX, 200 MXC, 200 EGS, 200 XC-W, 250 MXC, 250 XC-W, 300 XC-W, 380 SX, 380 EXC, 380 MXC
• Added new feature: get weather (temperature, pressure, humidity) via Bluetooth using weather stations: Kestrel DROP, Kestrel 5x00, WeatherFlow WEATHERmeter, Skywatch BL
• Added new feature: added the ability to calibrate the barometer built into your phone or tablet (go to the “Settings“ tab, then “Measurement units“)
• Added new feature: added various utilities (unit converters) (go to the “Settings“ tab, then “Utils“)
• We have improved our weather calculator significantly. Now you can manually select which type of atmospheric pressure you are working with (for example if you use portable barometers, weather stations):
- sea level pressure QNH
- sea level pressure QFF
- station pressure (barometric pressure)
• Many carburation recommendations have been slightly revised for better performance. Therefore, we strongly recommend that you check the fine tuning sliders, you may need to change them
• Now you can see size of Throttle Valve for each carburation recommendation on the 'Results' tab
• New type of fuels have been added: VP Racing C12, VP Racing 110, VP Racing MRX02
• On the results tab, click on the drop-down menu 'Weather (AirLab)', new data for tuners are available: Air Density, Relative Air Density, Density Altitude, Station Pressure, SAE - Dyno Correction Factor, SAE - Relative Horsepower, Volumetric Content Of Oxygen, Oxygen Pressure
• The new color design is available (night mode), you can find it on 'Engine' tab at the very bottom
• Improved functionality for the feature 'Weather for custom location'. We added a search bar where you can enter the location name. Search places easier and faster now
• We added new fuels, this is gasoline with ethanol. It require a richer carburation than regular premium gasoline
• Improved functionality and accuracy of fuel calculator
• Bug fixes for 'share setup with friends' feature
• Fixes for showing 'Carburetor icing alert', now it doesn't overlap other content
• We reworked the altitude determination algorithm for the 'weather for custom location' feature. We hope that now, if you manually selected your location, the altitude will be calculated with much greater accuracy
• We added the ability to leave text notes for each history in 'History' tab. To do this, open any History, enter edit mode and add a note.
Version 2.2 17 November 2020
• Now you can choose models from 1998 to 2021 year
• We have improved our weather calculator significantly. Now you can manually select which type of atmospheric pressure you are working with (for example if you use portable barometers, weather stations):
- sea level pressure QNH
- sea level pressure QFF
- station pressure (barometric pressure)
• Also new models have been added. Such as 50 SX, 50 SX Mini, 50 SX Pro Senior, 50 SX Pro Junior, 50 Senior, 50 Supermoto, 60 SX, 125 MXC, 125 EXE, 125 Supermoto, 150 XC-W, 200 SX, 200 MXC, 200 EGS, 200 XC-W, 250 MXC, 250 XC-W, 300 XC-W, 380 SX, 380 EXC, 380 MXC
• Many carburation recommendations have been slightly revised for better performance. Therefore, we strongly recommend that you check the fine tuning sliders, you may need to change them
• Now you can see size of Throttle Valve for each carburation recommendation on the 'Results' tab
• New type of fuels have been added: VP Racing C12, VP Racing 110, VP Racing MRX02
• On the results tab, click on the drop-down menu 'Weather (AirLab)', new data for tuners are available: Air Density, Relative Air Density, Density Altitude, Station Pressure, SAE - Dyno Correction Factor, SAE - Relative Horsepower, Volumetric Content Of Oxygen, Oxygen Pressure
• The new color design is available (night mode), you can find it on 'Engine' tab at the very bottom
• Improved functionality for the feature 'Weather for custom location'. We added a search bar where you can enter the location name. Search places easier and faster now
• We added new fuels, this is gasoline with ethanol. It require a richer carburation than regular premium gasoline
• Improved functionality and accuracy of fuel calculator
• Bug fixes for 'share setup with friends' feature
• Fixes for showing 'Carburetor icing alert', now it doesn't overlap other content
• We reworked the altitude determination algorithm for the 'weather for custom location' feature. We hope that now, if you manually selected your location, the altitude will be calculated with much greater accuracy
• We added the ability to leave text notes for each history in 'History' tab. To do this, open any History, enter edit mode and add a note.
Version 2.1 13 October 2020
• Now you can choose models from 1998 to 2021 year
• We have improved our weather calculator significantly. Now you can manually select which type of atmospheric pressure you are working with (for example if you use portable barometers, weather stations):
- sea level pressure QNH
- sea level pressure QFF
- station pressure (barometric pressure)
• Also new models have been added. Such as 50 SX, 50 SX Mini, 50 SX Pro Senior, 50 SX Pro Junior, 50 Senior, 50 Supermoto, 60 SX, 125 MXC, 125 EXE, 125 Supermoto, 150 XC-W, 200 SX, 200 MXC, 200 EGS, 200 XC-W, 250 MXC, 250 XC-W, 300 XC-W, 380 SX, 380 EXC, 380 MXC
• Many carburation recommendations have been slightly revised for better performance. Therefore, we strongly recommend that you check the fine tuning sliders, you may need to change them
• Now you can see size of Throttle Valve for each carburation recommendation on the 'Results' tab
• New type of fuels have been added: VP Racing C12, VP Racing 110, VP Racing MRX02
• On the results tab, click on the drop-down menu 'Weather (AirLab)', new data for tuners are available: Air Density, Relative Air Density, Density Altitude, Station Pressure, SAE - Dyno Correction Factor, SAE - Relative Horsepower, Volumetric Content Of Oxygen, Oxygen Pressure
• The new color design is available (night mode), you can find it on 'Engine' tab at the very bottom
• Improved functionality for the feature 'Weather for custom location'. We added a search bar where you can enter the location name. Search places easier and faster now
• We added new fuels, this is gasoline with ethanol. It require a richer carburation than regular premium gasoline
• Improved functionality and accuracy of fuel calculator
• Bug fixes for 'share setup with friends' feature
• Fixes for showing 'Carburetor icing alert', now it doesn't overlap other content
• We reworked the altitude determination algorithm for the 'weather for custom location' feature. We hope that now, if you manually selected your location, the altitude will be calculated with much greater accuracy
• We added the ability to leave text notes for each history in 'History' tab. To do this, open any History, enter edit mode and add a note..
Similar app Problems
âś“ Jetting for KTM 2T Moto Help Center Note

Update your device software to the latest version, delete the app and redownload it from the app store. Your jetting for ktm 2t moto app progress will be retained as long as the device is connected to the internet. Also, ensure that your device meets the minimum system requirements.