Is SprintTimer - Photo Finish not working / having issues for you?

APP NAME
SprintTimer - Photo Finish
VERSION
18.0
APP WORKING?

Recently reported problems with SprintTimer - Photo Finish within the last 24 hours

Not Working75%
Login Issue55%
Loading Problem25%
Installation Issue85%

SprintTimer - Photo Finish App Status (May 2024)

If you're experiencing difficulties with the SprintTimer - Photo Finish app, the issue might be related to your device or internet connectivity. Should you believe the app is the culprit, kindly provide a detailed description of the problem, and a community member might offer guidance. While you await feedback, consider attempting these troubleshooting measures.

App Name SprintTimer - Photo Finish
App Category Sports
Developer Sten Kaiser
Relase Date 15 April 2011, Friday
Last Update 17 April 2023, Monday
Compatibility IOS 12.1 or later

Common SprintTimer - Photo Finish App Problems and Troubleshooting Steps

Android, iOS, or macOS operating system users may encounter a problem where an app will display a black screen for a few seconds before crashing, with or without an error message. However, there are a few methods you can try to fix this issue:

  1. Sometimes, this problem may be caused by a temporary loading issue. To fix this, go to the recent applications menu on your phone, usually accessed by the first left button, and close the app that is experiencing the issue. Then, re-open the app.
  2. If that doesn't work, try doing a hard reboot of your iPhone, iPad, Mac or Android device by simultaneously pressing and holding the "Home" and "Power" buttons for up to 10 seconds, then release them and hold the "Power" button until the screen turns on. After that, try opening the app again.
  3. If none of the above solutions work, another option is to wait for the phone battery to drain and turn off automatically. After that, charge the phone and turn it on and try opening the app again.
  4. If the problem persists, you may need to uninstall and re-install the app. Re-installing the app will restore all settings.
  5. If the app still does not work, you can try installing older versions of the app.

My SprintTimer - Photo Finish app wont load or not working properly (loading error / server error / connection error / screen freeze / ping problem)

There are a number of reasons why a mobile app may experience loading issues. Some common causes include:

  1. The SprintTimer - Photo Finish app server may be experiencing downtime, which can cause loading issues. Try accessing the app again after a few minutes.
  2. Your wifi or mobile data connection may not be working properly, which can affect the app's ability to load. Make sure your connection is stable.
  3. There may be too many users accessing the app at the same time, causing a slowdown. In this case, try accessing the app again after a few minutes when usage may be lower.

I'm having SprintTimer - Photo Finish login issue or account related issues

If you are experiencing issues with logging in or with your account, please take the following steps to troubleshoot the problem:

  1. Check if the SprintTimer - Photo Finish server is down, as this can cause login and account issues. If so, try logging in again after a few minutes.
  2. Verify that your wifi or mobile data connection is working properly.
  3. Ensure that you are using the correct login credentials. Double check the details you are entering.
  4. If you're logging in using a third-party service like Facebook, Twitter, or Google, check to make sure that the service is functioning properly by visiting its official website.
  5. If you see error message, check if your account has been banned or deactivated.

I have SprintTimer - Photo Finish app installation issues

There seems to be some issues with the installation of the SprintTimer - Photo Finish app. To resolve this, please follow these steps:

  1. Ensure that your wifi or internet connection is stable.
  2. Verify that you have enough storage space on your mobile device. A lack of sufficient space may prevent the app from being installed.
  3. Check that the version of the MacOS, IOS or Android operating system on your device is compatible with the version of the app you are trying to install.
sprinttimer - photo finish not working image-1
sprinttimer - photo finish not working image-2
sprinttimer - photo finish not working image-3
sprinttimer - photo finish not working image-4

My SprintTimer - Photo Finish app is not updating properly in my phone

In order to ensure that you are able to update the SprintTimer - Photo Finish app, please take the following steps:

  1. Verify that your wifi or mobile data connection is functioning properly. If the connection is down, it may prevent the app from updating.
  2. Make sure that your phone has enough storage space to download the updates. If there is not enough space, it may prevent the app from updating.

Audio/video loading problem with SprintTimer - Photo Finish

If you are experiencing audio problems while using a phone, there are a few steps you can take to troubleshoot the issue:

  1. Verify that the volume on your phone is not turned down or muted.
  2. Try using headphones to determine if the problem is with the phone's speakers or with the app itself.

If you are having trouble with videos loading, some potential solutions include:

  1. Checking your internet speed and wifi connectivity to ensure that you have a stable connection.
  2. Make sure that your phone has enough storage space to download the videos.
  3. Check if the app is compatible with your operating system version.
  4. Check that your phone is not running on low-power mode.

SprintTimer - Photo Finish app notifications are not working properly

If you are not receiving notifications for the SprintTimer - Photo Finish app, you can check the app's notification settings by following these steps:

  1. Go to the "Apps" section on your device. Locate the "SprintTimer - Photo Finish" app.
  2. Check the notification settings to see if they are enabled. If they are not, please enable them.
  3. If you are not getting notification sounds, make sure that the app's notification sound is not accidentally muted.

Please wait! SprintTimer - Photo Finish app comments loading...

I have a problem with SprintTimer - Photo Finish!

Are you experiencing issues with the SprintTimer - Photo Finish app or would you like to share some feedback? Please write your problem above and someone from our community may help you.

SprintTimer - Photo Finish Developer Updates

Version 18.0 17 April 2023
A "Shot-filter" in Sound start.
Improved amplification in Hand/mic.
Improved routines and feedback when saving Base videos.
A close button in "remote recording" in Start Sender..
Version 17.9 07 December 2022
A time format setting in the export.
Fixed some problems in Self start and Flying sprint on iOS 16..
Version 17.8 21 May 2022
- The recording start time and recording length on the finish device can be set from Start Sender.
- The race name in the save dialog can be applied to a results list even if no image or video is saved.
- The human detection in Start Sender can be set to "always on"..
Version 17.7 06 April 2022
Improvements when using an external monitor.
Fixed problems uploading base videos to iCloud and when saving long Video Finish videos..
Version 17.6.1 14 November 2021
Fixed a problem that could cause the time to be displayed as 0.00 in Photo Finish..
Version 17.5 19 October 2021
Stride length and acceleration measurement in Flying Sprint..
Version 17.4 17 June 2021
The sensitivity for external microphones can be set..
Version 17.1 09 April 2021
- Improved video recording on iPhone 12.
- A "Flash at start" setting in Start Sender.
- Improved feedback of the synchronization in both direct and cloud mode..
Version 16.3 17 February 2021
Added an 'unlimited' buying option to SprintTimer Pro.
Bug fixes..
Version 16.1 11 December 2020
Support for Bluetooth gamepads as remote controllers..
Version 16.0.1 17 November 2020
Version 16.0.1 fixes a bug in the QR-code detection.
New in v. 16.0:
Motion and Instant Finish
- A Manual mode has been added. Tap on the screen to save one image/time.
- The motion detection at high frame rates has been improved.
- The direction setting has been removed, but the motion detection zone is draggable (and pinchable) in the Preview.
- A new Reset the clock at first pass in Instant finish. This gives a motion-triggered start that can be useful for e.g. shuttle tests.
- There is a new Set Up in the Video finish view. It allows you to change direction after the race, which affects the Dual mode.
- A Human detection mode has been added. Images/times are saved when the camera detects a human.
- QR code detection in Instant Finish. Times and code content are saved (one per code) when the camera detects a QR.
Start Sender
- DropToSS in Auto finish. Automatically sends the Base video to the Start Sender device (including Mac).
- Human detection. It uses several detections to calculate when the runner passes the starting line.
- Sound start can be remotely activated also in cloud mode.
- Improved feedback and error-handling in cloud mode..
Version 15.7 08 October 2020
- Added 12 new start sounds, including a "Multibeep" sound useful for staggered starts.
- The start offset time is now available in all start modes and can be set individually for each mode..
Similar app Problems
✓ SprintTimer - Photo Finish Help Center Note

Update your device software to the latest version, delete the app and redownload it from the app store. Your sprinttimer - photo finish app progress will be retained as long as the device is connected to the internet. Also, ensure that your device meets the minimum system requirements.