Is EchoLab not working / having issues for you?
Recently reported problems with EchoLab within the last 24 hours
EchoLab App Status (April 2024)
If you are having trouble with the EchoLab app, it may be due to a problem with your device or internet connection. If you suspect that the app itself is causing the issue, please submit a comment describing the problem, and someone from the community may be able to assist you. In the meantime, you can try the following troubleshooting steps.
App Name | EchoLab |
App Category | Medical |
Developer | Medical Appware, LLC |
Relase Date | 12 April 2011, Tuesday |
Last Update | 04 April 2023, Tuesday |
Compatibility | IOS 16.0 or later |
Common EchoLab App Problems and Troubleshooting Steps
Android, iOS, or macOS operating system users may encounter a problem where an app will display a black screen for a few seconds before crashing, with or without an error message. However, there are a few methods you can try to fix this issue:
- Sometimes, this problem may be caused by a temporary loading issue. To fix this, go to the recent applications menu on your phone, usually accessed by the first left button, and close the app that is experiencing the issue. Then, re-open the app.
- If that doesn't work, try doing a hard reboot of your iPhone, iPad, Mac or Android device by simultaneously pressing and holding the "Home" and "Power" buttons for up to 10 seconds, then release them and hold the "Power" button until the screen turns on. After that, try opening the app again.
- If none of the above solutions work, another option is to wait for the phone battery to drain and turn off automatically. After that, charge the phone and turn it on and try opening the app again.
- If the problem persists, you may need to uninstall and re-install the app. Re-installing the app will restore all settings.
- If the app still does not work, you can try installing older versions of the app.
Please note that, Good luck or re-installation may not always work and it may vary based on the app, phone and the problem.
My EchoLab app wont load or not working properly (loading error / server error / connection error / screen freeze / ping problem)
There are a number of reasons why a mobile app may experience loading issues. Some common causes include:
- The EchoLab app server may be experiencing downtime, which can cause loading issues. Try accessing the app again after a few minutes.
- Your wifi or mobile data connection may not be working properly, which can affect the app's ability to load. Make sure your connection is stable.
- There may be too many users accessing the app at the same time, causing a slowdown. In this case, try accessing the app again after a few minutes when usage may be lower.
I'm having EchoLab login issue or account related issues
If you are experiencing issues with logging in or with your account, please take the following steps to troubleshoot the problem:
- Check if the EchoLab server is down, as this can cause login and account issues. If so, try logging in again after a few minutes.
- Verify that your wifi or mobile data connection is working properly.
- Ensure that you are using the correct login credentials. Double check the details you are entering.
- If you're logging in using a third-party service like Facebook, Twitter, or Google, check to make sure that the service is functioning properly by visiting its official website.
- If you see error message, check if your account has been banned or deactivated.
I have EchoLab app installation issues
There seems to be some issues with the installation of the EchoLab app. To resolve this, please follow these steps:
- Ensure that your wifi or internet connection is stable.
- Verify that you have enough storage space on your mobile device. A lack of sufficient space may prevent the app from being installed.
- Check that the version of the MacOS, IOS or Android operating system on your device is compatible with the version of the app you are trying to install.
My EchoLab app is not updating properly in my phone
In order to ensure that you are able to update the EchoLab app, please take the following steps:
- Verify that your wifi or mobile data connection is functioning properly. If the connection is down, it may prevent the app from updating.
- Make sure that your phone has enough storage space to download the updates. If there is not enough space, it may prevent the app from updating.
Audio/video loading problem with EchoLab
If you are experiencing audio problems while using a phone, there are a few steps you can take to troubleshoot the issue:
- Verify that the volume on your phone is not turned down or muted.
- Try using headphones to determine if the problem is with the phone's speakers or with the app itself.
If you are having trouble with videos loading, some potential solutions include:
- Checking your internet speed and wifi connectivity to ensure that you have a stable connection.
- Make sure that your phone has enough storage space to download the videos.
- Check if the app is compatible with your operating system version.
- Check that your phone is not running on low-power mode.
EchoLab app notifications are not working properly
If you are not receiving notifications for the EchoLab app, you can check the app's notification settings by following these steps:
- Go to the "Apps" section on your device. Locate the "EchoLab" app.
- Check the notification settings to see if they are enabled. If they are not, please enable them.
- If you are not getting notification sounds, make sure that the app's notification sound is not accidentally muted.
Note: The instructions may vary based on the device or operating system. It is always a good idea to check your device's documentation or manual to verify the exact steps to access the app's notification settings.
Please wait! EchoLab app comments loading...
I have a problem with EchoLab!
Are you experiencing issues with the EchoLab app or would you like to share some feedback? Please write your problem above and someone from our community may help you.
EchoLab Developer Updates
An extensive update with a focus on left atrial function: • New calculations and analyses for left atrial emptying fraction, left atrial expansion index, left atrial function index, and left atrial reservoir strain. • New calculation of pulmonary capillary wedge pressure (PCWP) from the left atrial expansion index. • Left Atrial Volume and Function view modified for entry of maximum and minimum left atrial volumes. • Analytic Engine updated to assess risk of developing atrial fibrillation, based on echocardiographic parameters. Additional new features: • New Demographics and Clinical Conditions view added to allow rapid baseline data entry and designation of conditions affecting data analysis (such as presence of a valve prosthesis). Consider making this view one of your favorites for easy access, since once the patient’s sex is designated here, it no longer is necessary to specify the sex when utilizing the Analytic Engine. • Right ventricular free wall strain added to right ventricular assessment. • Strain Imaging added as a new view category for data entry. • Multiple refinements of the Analytic Engine, including enhanced assessment of hypertrophic cardiomyopathy. • List of echocardiography and cardiology organizations expanded to over 70 direct links, found under “Organizations” using the “?” button at the top right of the initial app screen. EchoLab is optimized for Dark Mode, ideal for use in the dimmed lighting of a typical echocardiography reading room. Remember that designating Quick Entry views as favorites permits easy access to the most frequently used echocardiographic measurements under the Favorites tab. Remember also to check out the bundled Apple Watch app for EchoLab, providing a ready reference when performing echocardiograms..Version 9.0.1 22 May 2022
• Minor update to expand display for height and weight to 2 decimal places, along with expanded decimal used internally for conversion of pounds to kilograms. New to EchoLab version 9.0: • All literature references, provided for each calculation, now include hyperlinks for direct internet access. • Literature references updated to include the latest societal guidelines. • New Aortic Valvulo-Arterial Impedance view added to the Aortic Valve section as an additional parameter for assessing aortic stenosis. • New Right Ventricular-Arterial Coupling view added to the Right Ventricle section as an additional parameter for assessing right ventricular contractile reserve in the presence of pulmonary hypertension. • Links to cardiology and echocardiography organizations updated in the Guides and Resources section. EchoLab is optimized for iOS 15 with Dark Mode, ideal for use in the dimmed lighting of a typical echocardiography reading room. Remember that designating Quick Entry views as favorites permits easy access to the most frequently used echocardiographic measurements under the Favorites tab. Remember also to check out the bundled Apple Watch app for EchoLab, providing a ready reference when performing echocardiograms..
App Name | Report Date |
CCHT PREP not updating properly | April 10, 2024 |
Hims notifications are not working properly | April 7, 2024 |
Fetal Heart Rate 5-tier not working | April 26, 2024 |
AthenaPatient installation issues | March 7, 2024 |
Hear My Baby Heart beat App not working | April 12, 2024 |
Mole Checker Skin Dermatology notifications are not working properly | April 18, 2024 |
ER Bay Finder login issue | March 4, 2024 |
CVS Caremark loading problem | March 16, 2024 |
Silent-Night - Anti Snoring not updating properly | April 21, 2024 |
CSL Plasma notifications are not working properly | April 4, 2024 |
Update your device software to the latest version, delete the app and redownload it from the app store. Your echolab app progress will be retained as long as the device is connected to the internet. Also, ensure that your device meets the minimum system requirements.